P. 16
User
Guide
2 x = Doors intrusion
3 x = Shock Sense
4 x = Hood
5 x = Panic
6 x = Ignition
7 x = Trunk
The alarm diagnostic by LED projects a LED flash sequence immediately after disarming and will
remain in that state of alarm memory until the ignition is turned ON.
Diagnostics – Chirps Table
Chirps
Description
1
•
Doors locked, alarm and starter kill armed.
•
LOCK
confirmation.
•
Entering mode 1 in the programming centre.
•
Disarmed notification
2
•
Doors unlocked, alarm and starter kill disarmed.
•
Transmitter programmed.
•
Entering mode 2 in the programming centre.
3
•
LOCK
and arm while a zone is left unprotected.
•
Entering mode 3 in the programming centre.
•
Door zone left unprotected.
4
•
UNLOCK
and disarm: an intrusion was detected (in warning chirps mode or full chirps
mode).
•
Entering tach-programming mode.
•
Entering mode 4 in the programming centre.
5
•
Siren or horn chirp timing adjustment
Constant
up to 60 sec
•
In siren or horn mode: alarm condition generated by an intrusion, by panic mode or when
the system is powered up. The siren will sound for 60 sec.
