P. 12
User
Guide
c)
If the key is in the ignition and turned to the ON position, by pressing the valet switch (if included).
Panic Mode will automatically shut down after 30 sec.
Quick Lockout
TM
(Also called
secure panic
.) For fast protection in emergency situations, the system will
LOCK
all
doors when you
press the brake pedal while you hear the sound signal
. (
Quick lockout
is only
available when
panic mode
has been set off.) For example: a person is pursued, or feels
threatened, from a reasonable distance, he or she can disarm his or her vehicle by pressing then
UNLOCK
button. Still while approaching the vehicle, the
SHIFT
button must be pressed and held for 3
seconds. It is now possible to take possession of the vehicle by immediately pressing on the break
pedal, therefore locking the doors. The vehicle is ready to start with key and the siren (or horn) is
activated to discourage the attacker. The person can now leave safely and deactivate the Panic
Mode by pressing the
LOCK
or
UNLOCK
button.
Temporary Chirp Delete
To temporarily disable the chirp confirmations of the siren upon arming and disarming (e.g. in a
quiet neighbourhood):
1.
Press the
TRUNK
button.
2.
Within 3 sec., press the
LOCK
or
UNLOCK
button to arm or disarm without any chirps.
Cold Weather Mode
Ready mode should be set before entering Cold Weather. When cold weather mode is active, the
engine starts every 2 hours and runs for 3 minutes (or for 8 or 20 minutes with diesel engines).
Cold weather mode automatically ends after 24 hours.
To enter Cold Weather Mode:
•
Press the
SHIFT
button and then the
START/STOP
for 3 seconds
.
There will be two (2) beeps and the parking lights will flash three (3) times.
To exit Cold Weather Mode, do any one of the following actions:
•
Open the hood.
•
Start the engine by remote.
•
Turn the ignition key to the
IGNITION ON (RUN)
position.
•
Press the
SHIFT
button and then the
START/STOP
button for three seconds.
There will be one (1) beep and the parking lights will flash once.
Advanced Features: Installation-programmable Options
The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
:
The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your remote starter.
The installation-programmable options are as follows:
Passive or Active Arming
Remote Door Locks
Priority Door Access
Ignition-controlled Door Locks
Ignition Re-lock
Relock
Secure Lock
Remote Trunk Release
Starter Kill / Anti-grind feature
Siren/Horn Chirp Timing
Safe Start
Home Valet
TM
Turbo Mode
Engine Run Time
Extended run time
Multi-car Operation
Passive or Active Arming
The security system and the starter kill can be configured either to passive mode (so as to arm
automatically) or active mode (so as to require user intervention for arming). By default, your
remote starter is configured to
passive mode
. In passive mode, the starter kill will automatically
arm
30 seconds
after the last door is closed. The remote starter will not arm if a door, hood or
trunk is left open, or if you re-open a door, hood or trunk within the 30-second delay. Please note
