User Guide
P. 11
Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into
the
IGNITION ON / RUN
and
OFF
positions.
The parking lights will flash three times to indicate that the vehicle is now in valet mode. The L.E.D.
will come
ON
solid.
To take the system o u t o f valet mode:
Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into
the
IGNITION ON / RUN
and
OFF
positions.
The parking lights will flash twice to indicate that the vehicle is now out of valet mode. The L.E.D.
will go out.
Note
: Once the ignition valet is activated, the remote starter and alarm functions will be
disabled.
Remote Valet Mode
This feature will allow you to remotely put your system into valet mode by using the transmitter
instead of the valet button as above.
Getting into valet mode
•
Hold the
UNLOCK
and
START/STOP
buttons simultaneously for 3 second.
•
The parking lights will flash 3 times.
The LED will remain on solid.
Getting out of valet mode
•
Hold the
UNLOCK
and
START/STOP
buttons simultaneously for 3 second.
•
The parking lights will flash 2 times.
The LED will turn off.
Note
: Once the remote valet is activated, the remote starter and alarm functions will be disabled.
“Home Valet
TM
” Mode
If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: if
the vehicle is parked indoors there is no danger of it starting accidentally by remote control.
Note:
Once the home valet mode is activated, the vehicle will not start by remote but the
alarm functions will still be active.
To take the system i n t o home valet mode:
•
Press the
LOCK
or
UNLOCK
button.
•
Within 3 seconds, press the
LOCK
and
START/STOP
buttons simultaneously until the
parking lights go
out
To take the system o u t o f home valet mode:
•
Turn the ignition key to the
IGNITION ON (RUN)
position.
The system will warn you if someone attempts to start your vehicle while it stands in home valet
mode. The parking lights will:
i.
Turn
ON
then
OFF
; then
ii.
Flash
twice
, pause; then
iii.
Flash
twice
again.
Panic Mode
In an emergency situation, you can activate panic mode by pressing and holding the
SHIFT
button
for 3 seconds until the alarm is activated and the parking lights start flashing. If the vehicle is under
a remote start, the engine will shut down immediately.
You can stop the horn or siren by pressing the
LOCK
or
UNLOCK
button.
Furthermore, the panic mode can be stop by activating one of the following three (3) features:
a)
Remote valet (pressing
UNLOCK
and
START/STOP
for 3 seconds)
b)
Ignition valet (turning the key inside the ignition switch from OFF to ON 5 times in a row)
