P. 16
User
Guide
LCD Transmitter Operation and Confirmations
(Second Car Control)
Basic Operations
Function
Button press
Icon
Sound
Lock
+
1 beep
Unlock
+
2 beeps
Start
+
+
Melody
Stop
+
None Melody
Trunk
¾
¾
1 Beep
Start/Stop While in Safe Start Mode
Function
Button press
Icon
Sound
Description
Start on safe start
mode
+
x 2
+
Melody
Press
+
simultaneously twice within 3
seconds. Press for 1 sec- a beep
will be heard- then press 1 sec
and a melody will be heard
again.
Stop on safe start
mode
+
None Melody
Missing a Start or a Stop Confirmation
If you have not received a Start or the Stop confirmation after pressing the
button, simply press
the
button. Pressing the
button will refresh the display and will confirm if the vehicle was
started or stopped.
No Start Confirmation Was Received:
If after remote starting the vehicle no confirmation was received, simply press the
button, this
will refresh the display. If the vehicle was started successfully, the
icon will appear as well as
the run time countdown. Pressing the
button will also lock all doors (the lock icon will appear).
If the doors were already locked prior to pressing the
button, there will be no change in the
status of the doors
i.e. the doors will remain locked.
On models where starter kills were installed, pressing the
button will also activate the starter
kill.
No Stop Confirmation Was Received:
If after remote stopping the vehicle no confirmation was received
i.e. the display did not return to
its basic state
simply press the
button, this will refresh the display. If the engine was
stopped, the icon will disappear and the time will be displayed.
Pressing the
button will also lock all doors (the lock icon will appear). If the doors were already
locked prior to pressing the
button, there will be no change in the status of the doors
i.e. the
doors will remain locked.
On models where starter kills were installed, pressing the
button will also activate the starter
kill.
