User Guide
P. 11
Extended Run Time
While the vehicle is running under a remote start,
pressing and holding the button for more
than 3 seconds
will reset the run time counter to zero and restart the run time cycle from the
beginning. There will be one beep
a pause
three more beeps; the parking lights will flash
three times and the horn (if configured) will honk once.
The extended run time procedure can
only be carried out once per remote start.
To stop the vehicle, at any moment, simply press the button.
Example:
If your remote car starter is programmed for a run time of 3 minutes and your vehicle
has been running for 2 minutes already, pressing the button will reset the counter
to zero and allow the engine to run for another cycle (in this case, 3 minutes).
Advanced Features: Installation-programmable Options
The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
:
The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your remote starter.
OEM Alarm
The factory alarm can be armed by pressing
button (active arming only). If a door or hood is
open or if the key is turned to the
IGNITION ON (RUN)
position, the horn will honk.
Remote Door Locks
If your remote starter was installed with the remote door locks option, you will have the
convenience of remote keyless entry. See section
Arming the Starter Kill,
on page 8, for further
instructions on remote door locking and unlocking.
Priority Door Access
If the remote door locks option is installed on your vehicle, this safety feature allows you unlock
solely the driver’s door with a single press of the
button on the transmitter; upon a second
press of the
button, all the other doors will unlock.
Ignition-Controlled Door Locks
This is an added security feature. If your remote starter was installed with the ignition-controlled
door locks option, the doors will automatically be locked as soon as the ignition key is turned to the
IGNITION ON (RUN)
position while the brakes are pressed. When the key is turned to the
OFF
position,
the doors will automatically be unlocked.
Ignition Re-lock
On remote starters of this series, when ignition-controlled door locks
are enabled and the ignition
key is in the
IGNITION ON (RUN)
position, should any door be unlocked and opened, all doors will be
relocked next time the brake pedal is pressed.
Secure Lock
Before it can remote-start your vehicle, the remote starter must first disarm the factory security
system. The secure lock feature may be required on certain vehicle models with factory security
systems that automatically unlock the doors when the security system is disarmed. To keep your
vehicle protected when the factory security system is disarmed for a remote start, secure lock will
relock your doors as soon as the vehicle has started. Once the engine run cycle ends, secure lock
will rearm your factory security system.
