ColorMFA Manual, firmware v2.9.4_b31
21
Coffee break
A warning about the need to take a rest break is turned on by selecting the
“
Enable
”
option on this screen. You can set the time interval or distance after which you want to display a
warning. The time and distance settings work separately, possible to enable / disable the option
that is more suitable for you.
Others
In this menu item you can turn on the menu timeout, turn on the
messages timeout, turn off the flashing of the icons and turn on the mirror
control.
-
Menu timeout
- when this item enabled, the device will auto-
matically return from the menu to the main screen if there was no action
from the user longer than the specified time. Time can be set as desired.
Automatic return to the main screen does not work in those sections that
require a long display without any action from the user. For example, in
diagnostics, in torque measuring, etc.
-
Messages timeout
– If errors occur or any event requiring at-
tention of the user (low level of the washing fluid, the need to replace the
pads, etc.), a message is displayed on the main screen. The message occupies the entire screen
(a malfunction / warning icon and text with a description are displayed). And by default, this
message requires confirmation from the user, otherwise it will not be removed from the screen.
Confirmation is by pressing the "Reset" button. When you enable the "Message Timeout" option,
no confirmation is required from the user and the message itself disappears from the screen after
the specified time has elapsed. To view this message again in full screen, go to the
. This setting is not applicable to critical messages (low oil pressure, high coolant tem-
perature, etc.). Such messages require mandatory confirmation by user.
- Flashing icons
- when this item is disabled, the message (alarms and warnings) icons
on the main screen will be displayed permanently. When this item is enabled, it is flashing (blink-
ing).
-
Seat Belt
- turns on the seat belt warning on the main screen.
