ColorMFA Manual, firmware v2.9.4_b31
27
CAN-monitor
Displays the current data exchange on the CAN-bus of the car with the indication of the
period between the messages.
You can display data from the motor, comfort and information buses (depending on the configu-
ration) by selection the relevant items.
MotorInfo
The current data of the engine control unit is displayed. Type of
gearbox (not letter code, namely type, eg AG6 means 6-speed automatic
transmission), engine size, factory power, manufacturer, idling RPM, etc.
The availability and the number of displayed data depends on the
type of engine control unit.
Firmware
The current version of the firmware is displayed on the screen and
the device can be switched to flashing mode (bootloader mode) for up-
dating.
If you select
"Yes"
, the system goes into flashing mode to update the
ColorMFA software. The instructions and the program for updating are
included in each archive with the firmware. The latest firmware can always
be found at
www.colormfa.ru
If you do not need to update the software in the bootloader mode, you
can exit this mode by pressing the
"Down"
button (on the Audi A48E,
the
"Check"
button on the dashboard).
