Autonics AiC Series, Руководство пользователя

Страница: 20 / 88

2 Specifications
20 © Copyright Reserved Autonics Co., Ltd.
2.2.4 Common Specifications
Standard step angle
1.8
°
/ 0.9
°
(Full / Half step)
Motor phase 2 phase
Run method Bipolar
Insulation class B type (130
°
C)
Insulation resistance
Over 100M
Ω
(at 500VDC megger) between motor coil-case
Dielectric strength 500VAC 50/60Hz for 1 min between motor coil-case
Vibration
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in
each X, Y, Z direction for 2 hours
Shock Approx. max. 50G
Environm
ent
Ambient temperature
0 to 50
°
C, storage: -20 to 70
°
C
Ambient humidity 20 to 85%RH, storage: 15 to 90%RH
Protection structure IP30 (IEC34-5 standard)
Stop angle error
※
1
±
0.09
°
Shaft vibration
※
2
0.03mm T.I.R.
Radial movement
※ 3
Max. 0.025mm (load 25N)
Axial movement
※
4
Max. 0.01mm (load 50N)
Concentricity for shaft of setup in-
low
0.05mm T.I.R.
Perpendicularity of set-up plate
shaft
0.075mm T.I.R.
※
1: Specifications are for full-step angle, without load. (Values may vary by load size)
※
2: T.I.R. (Total Indicator Reading): Indicate total dial gauge quantity in case of one complete
rotating monitored reference around a base point.
※
3: Amount of radial shaft displacement when adding a radial load (25N) to the tip of the motor
shaft.
※
4: Amount of axial shaft displacement when adding a axial load (50N) to the shaft.
※
Environment resistance is rated at no freezing or condensation.