Autometers Systems Limited
4b Albany Road, Chorlton-cum-Hardy, Manchester M21 0AW
Tel: +44 (0)161 861 9056 Fax: +44 (0)161 881 3745
email: [email protected] website: www.autometers.co.uk
Important
The meter must be fitted by a competent person and
must be fitted in accordance to the latest edition of
electrical regulations concerning electricity meters.
The attention of the specifier, purchaser, installer and
user is drawn to the special measures and limitations
to use, which must be observed when this product
is taken into service to maintain compliance with
the CE directives currently in force. Details of these
special measures and limitation to use are available
from HMSO.
Ref: IEC1000-5-1 (BS195/210788DC), IEC1000-
5-2 (BS195/214642DC), IEC1000-5-6 (BS195/
210789DC).
Dedicated customer service
Customer service is the cornerstone of the company’s
success. A positive service policy is observed
throughout every specialist area of operation.
The personal involvement of the directors at every
level, a highly trained and motivated staff, fully
computerised systems and in depth stock holding,
combine to provide a level of service which has
earned the appreciation of customers across the
spectrum of the UK and export markets.
Computerised distribution systems are geared to
consistent 24-hour despatch of products, with 20-
minute despatch being possible in respect to urgent
demand for small orders.
Product range
Metering and monitoring equipment ranges from
single and three phase kWh meters to a sophisticated
range of fully programmable information centres.
Also available are Electronic meters capable of
monitoring over 400 individual parameters with full
memory backup for in depth graphical analysis of
power usage, together with a range of devices which
enables data to be transferred utilising leading-edge
telephone technology, thus enabling the information
to be sent directly to the web and viewed via a PC,
a laptop computer or even a mobile ‘phone. The
information can also be sent to a dedicated internal
server if preferred.
Product development is continuous and Autometers
Systems Ltd reserves the right to make alterations
in specifications and manufacture without notice.
Products as delivered may therefore differ slightly
from the description and illustrations contained in
this publication.
Publication No. IC9. 03.06