AUTOMATOR INTERNATIONAL SRL
–
Via Meucci n.8
–
20094 Corsico (Mi) Italia
Tel 02 48601445 Fax 02 48601503 e-mail [email protected] www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Document
INSTRUCTION FOR USE
Code:
MAN MBVPREV3
Ediz.n: 4
Del: 03/2012
Pag. 16/26
Edited by: U.T. VB
1.1.1.1.1.1
.
Appr. by: RB.
Machine:
VP UNITS
➢
Before putting in function the machine and at any doubt, the operator must read attentively the
instructions, making known its content to the interested people
➢
In the search of a damage or a problem inherent the unit, adopt all the precautions necessary to
prevent any damage to people or things. Remove pneumatic tension, before acting
It is forbidden to use the machine for operations that are not contemplated in this manual, that is MARKING .
Automator International is not responsible for damage, risks or dangers to
people, machine and to the
ambient for other applications than marking
3.3.1 HEIGHT ADJUSTMENT
The adjustment of the head height is defined by the
operator while mounting the VP unit on line, in relation
to the object to be marked.
The light between the surface to be marked and the
marking head MUST be less than 2mm, in order not to
put hands, fingers or other under the marking unit -
UNI EN 349
To adjust the height of the body in relation to the
dimensions of the piece to be marked, raise the body
on the support You fix the unit ; or, vice versa, lower it
down.
The two hungers (Ref. 114) have four holes to secure
the unit to the support. If unnecessary, the hungers
(Ref. 114) can be removed, unscrewing the four + four
bolts.
Fix tightly the unit on the support. If not,
it
can
fall
or
move
during
the
operations, slipping towards the bottom
The support holding the unit must non
be subject to vibration
