AUTOMATOR INTERNATIONAL SRL
–
Via Meucci n.8
–
20094 Corsico (Mi) Italia
Tel 02 48601445 Fax 02 48601503 e-mail [email protected] www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Document
INSTRUCTION FOR USE
Code:
MAN MBVPREV3
Ediz.n: 4
Del: 03/2012
Pag. 12/26
Edited by: U.T. VB
1.1.1.1.1.1
.
Appr. by: RB.
Machine:
VP UNITS
2.9 ELECTROMAGNETIC EMISSIONS
The machine does not contain components that determines radiation in the environment. The electronic keyboard
complies with the Directive on Electromagnetic Compatibility (EMC)
2.10 PRECAUTIONS FOR INSTALLATION
All the installation operations of the machine, specified in this chapter, should be performed
only by trained personnel.
Personnel assigned to all the installation of the machine must be trained and must have a thorough knowledge
of safe working.
2.11 CHOICE OF PLACE AND VERIFICATIONS OF THE REQUIREMENTS FOR
INSTALLATION
The choice of the place of installation requires to meet the following requirements:
•
• Environmental conditions within the prescribed limits of the technical characteristics
• Compressed air supply within the prescribed limits
• Plan the work bench suitable
• Appropriate Support
• Requirements of the operating area suitable for marking operating activities
2.12 PACKINMG, TRANSPORT AND LIFTING
The machine is shipped partially assembled by the manufacturer, so as to allow easy packing and transport.
The cardboard packaging and internal shapes do not protect the contents from falling/drops. Handle with care.
If not, this could result in damage to the system, not due to the supplier.
There are no special precautions or instructions relating to grip points for the lifting of the
packages, except the eventual overturning.
The cardboard packaging do not protect the contents against moisture, liquids, condensate, which would
seriously damage the components of the head/controller
