1
Sales 800-633-0405
www.productivity2000.com
®
Warranty: Thirty-day money-back guarantee. Two-year limited replacement.
(See www.productivity2000.com for details).
P2-HSI High-Speed Pulse Input
The P2-HSI High-Speed Input Module provides
differential (line receiver, 5V max) and single
ended (5–24 V) inputs that accept up to 1MHz
of pulse/direction and quadrature signals on
each of the two independent input channels.
Additionally, four 5–24 VDC general purpose
high-speed inputs and four general purpose
5–24 VDC, 0.5A outputs are included for use
with any Productivity2000 System.
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Connector Specifications . . . . . . . . . . . . . . . . . . . . . 1
QR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General Specifications . . . . . . . . . . . . . . . . . . . . . . 2
Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Status Output Specifications . . . . . . . . . . . . . . . . . . 2
Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . 2
Single Ended (5–24 V) Input Specifications . . . . . . 3
Differential (5V) Input Specifications . . . . . . . . . . . . 3
Hot Swap Information . . . . . . . . . . . . . . . . . . . . . . . 3
Module Installation . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wiring Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Frequency Measurement Details . . . . . . . . . . . . . . 5
5V Encoder Inputs Wiring Diagram . . . . . . . . . . . . . 6
24V Encoder Inputs Wiring Diagram . . . . . . . . . . . . 6
Status Inputs Wiring Diagram . . . . . . . . . . . . . . . . . 7
Status Outputs Wiring Diagram . . . . . . . . . . . . . . . . 7
Sinking I/O Wiring Diagram . . . . . . . . . . . . . . . . . . . 8
Sourcing I/O Wiring Diagram . . . . . . . . . . . . . . . . . 8
Document Name
Edition/Revision
Date
P2-HSI-DS
4th Ed.
5/14/2020
Copyright 2018, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
WARNING:
To minimize the risk of potential safety problems, you
should follow all applicable local and national codes that regulate the
installation and operation of your equipment. These codes vary from
area to area and it is your responsibility to determine which codes
should be followed, and to verify that the equipment, installation, and
operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from
the failure to follow all applicable codes and standards. We do not
guarantee the products described in this publication are suitable for
your particular application, nor do we assume any responsibility for
your product design, installation, or operation.
If you have any questions concerning the installation or operation
of this equipment, or if you need additional information, please call
Technical Support at 770-844-4200.
This publication is based on information that was available at the
time it was printed. At AutomationDirect.com
®
we constantly strive to
improve our products and services, so we reserve the right to make
changes to the products and/or publications at any time without notice
and without any obligation. This publication may also discuss features
that may not be available in certain revisions of the product.
Connector Specifications
Connector Type
IDC style header with latch, Omron XG4A-4034
Number of Pins
40 point
Pitch
0.1 in (2.54 mm)
QR Code
Use any QR Code reader application to
display the module’s product insert.
