AutomationDirect DURAPULSE GS3-2010, Руководство пользователя

Страница: 18 / 316

Chapter 1: Getting Started
1–4
Selecting the Proper Drive Rating (continued)
E. Calculate required output amperage
Use the chart below to calculate the required FLA of the AC drive, as shown by
the following examples. Select the rating that equals the motor’s voltage and
equals or exceeds the calculated amperage.
• Example 1 (GS1 or GS2 drive):
Motor FLA = 6A; Overload = 200% @ 45s; Altitude = 800m; MEIT = 45°C
• Example 2 (DURA
PULSE
GS3 drive):
Motor FLA = 8A; Overload = 135% @ 75s; Altitude = 1100m; MEIT = 35°C
Calculating Required Drive Current
If Then Enter
Example 1
GS1 or GS2
Example 2
GS3
DURA
PULSE
Overload Derate (overload %)
If overload is < 150% and < 60 seconds 1
1.33 1.35 If overload is > 150% and < 60 seconds (overload / 150)%
If overload is > 60 seconds (overload / 100)%
Overload Result Multiply FLA x overload entry 8.0 10.8
Altitude Derate (meters)
Altitude is < 1,000m 1
1 1.01
Altitude is > 1,000m and < 3,000m 1 + ((altitude - 1,000m) x 0.0001)
Altitude Result Multiply overload result x altitude entry 8.0 10.91
Ambient Temperature (°C)
Maximum enclosure internal
temperature (MEIT) is < 40°C
1
1 1
40°C < MEIT < 50° and
GS1/2 AC drive up to 5hp
1
40°C < MEIT < 50° and GS1/2
AC drive > 5hp or DURA
PULSE
AC drive
1.2
Required Drive FLA Multiply altitude result x MEIT entry 8.0 10.91
DURA
PULSE AC Drive User Manual 1st Ed. Rev. D 05/2013