DL205 Installation and I/O Manual, 2nd Edition
1–4
Chapter 1: Introduction
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
CPU-Slot Controllers
There are currently six “base controllers” or “I/O controllers available for the DL205
hardware. Five of these are actually slave controllers and one is a stand-alone controller. These
controllers allow the use of industry proven DL205 I/O for general purpose distributed
applications.
The controller modules are plugged into the CPU slot of any size DL205 base. The slave
controllers must be connected to a network master controller module or to a PC running
PC-based control, HMI or SCADA software.
The four controllers currently available are:
•
Ethernet Base Controller Module
- H2-EBC(100)(-F)
•
Profibus Slave Base Controller Module
- H2-PBC
•
DeviceNe
t
TM
Slave Module
- F2-DEVNETS-1
• Smart Distributed System
TM
Slave Module
- F2-SDS-1
• WinPLC
- H2-WPLCx-xx
The WinPLC uses Windows CE, a real-time operating system combined with the advantages
of open standard software such as OPC, ActiveX and other Microsoft communications tools.
The WinPLC only supports certain DL205 modules (consult the WinPLC User Manual).
H2–EBC–F
F2–DEVNETS–1
F2–SDS–1
H2–WPLCx–xx
H2–PBC
H2–EBC(100)
