Automatic Systems SMARTLANE SL 90 Series Скачать руководство пользователя

Страница: 37 / 66

SL 90X-91X

Technical Manual

NAM-SL 90X-91X-TM-04-EN-E

With a constant view to adopting the latest technological developments, Automatic Systems reserves the right to amend the above information at any time

p. 37/66

www.automatic-systems.com

between which the shutter moves (see

Figure 20

item [2]). The shutter protectors are the thin

plexiglass strips preventing the shutter from interfering with the internal elements when retracting

(see

Figure 20

The sliding bands are thin plastic strips glued on the stainless steel shutter guides to

avoid contact between the metal and the moving shutter (see

Figure

item [1]). The sliding bands

could wave over time if they are in contact with cleaning products (e.g., window cleaner); avoid any

liquid penetrating in this area.



Look for premature damage and plastic grindings.



Manually open and close mobile obstacles slowly to detect abnormal noises or resistance in the

movement caused by the shutter, shutter guides or sliding bands.



Grease moving parts and shutter guides.

9.12.

DIRAS

DIRAS are really sensitive. Avoid moving DIRAS.



Verify that all DIRAS are solidly attached. The DIRAS are positioned behind the Plexiglas in the

panels, behind the Plexiglas below the top of the unit and behind the Plexiglas on each side of the

fixed obstacle (option).



Ensure each DIRAS is working properly using the maintenance panel (MP38). D

o not modify dip

switch configurations even if a malfunction has been detected.



Verify proper alignment of all DIRAS, horizontal or vertical, depending on their position. DIRAS are

very sensitive, be careful not to accidently move, hit or misalign a DIRAS.



Verify connections.

Содержание SMARTLANE SL 90 Series



































































Результаты поиска

Содержание SMARTLANE SL 90 Series

Отзывы:

Похожие инструкции для SMARTLANE SL 90 Series

Бренды по названию

Популярные бренды

Automatic Systems SMARTLANE SL 90 Series, Техническое руководство

Результаты поиска

Содержание SMARTLANE SL 90 Series

Отзывы:

Похожие инструкции для SMARTLANE SL 90 Series

Бренды по названию

Популярные бренды