The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the use of the
products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems. The document is subject to
change without notice.
Smart n' Slim MP-MT-EN
p
38/40
#Configurer M340-MT-FR-00#
Emergency stop
When this button is pressed, the lane switches to evacuation mode, i.e.,
obstacles open and remain open to allow free passage through the lane in
both directions.
This operating mode has priority over all other modes.
The emergency stop activates once the command is confirmed:
At that moment, the Evacuation icon is displayed
on the lane:
The emergency stop button is animating.
To deactivate the emergency stop, press the button again and confirm
the command.
Help
See item of the
Main counters
Main counters are displayed by default (i.e., part of the counters of list
).
Operating mode
icon
Icon of the operating mode for the specific direction of passage (see item
of the
Note
: A single click on the Controlled mode icon
grants a passage
authorization in the specific direction of passage.
Operating modes
Lists used to select the specific operating mode for the lane in each
direction of passage (see the
If this configuration is different from the one chosen in the
screen, the most recent configuration is the one that will be applied.
Obstacle
configuration
List used to select the status of the obstacles in standby (see the
Usage statistics
Button used to access the
Event log
Button used to access the
Maintenance
Direct access to the maintenance interface of the lane (only for SlimLane
devices)
see maintenance interface manual.
12
5
11
10
9
8
7
7
3
6
2
5
4
4
