Automatic Systems Smart n' Slim MP v02 r00, Техническое руководство

Страница: 10 / 40

The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the use of the
products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems. The document is subject to
change without notice.
Smart n' Slim MP-MT-EN p
10/40
#Configurer M340-MT-FR-00#
Emergency stop When this button is pressed, all lanes of the site to which the user has
access (i.e., the lanes displayed in area ) switch to evacuation mode.
The obstacles open and remain open to allow free passage through the
lane in both directions.
Note : This button can be used by all users no matter what their access
level and can even be pressed from the myGroup and myGate screens.
In all cases, the emergency stop is activated for the entire site.
This operating mode has priority over all other modes.
The emergency stop activates once the command is confirmed:
At that moment, the Evacuation icon is displayed
on all groups:
The emergency stop button is animating.
To deactivate the emergency stop, press the button again and
confirm the command.
Groups of lanes
Displays the real-time status of the entire site , i.e., of all groups of lanes
on the network to which the user has access (see L
OGIN
). All groups are
displayed for Administrator-level users, as opposed to only the groups
authorized for users with other access levels.
In the figure above, the site is composed of 3 groups of 2 lanes each.
A group flashes (based on the color code defined in Help ) when an
event occurs in at least one of the lanes in that group.
- Red

a major error is detected in at least one lane of the group.
- Orange

a minor error is detected in at least one lane of the
group.
- Yellow

an alarm was triggered on at least one lane of the group.
The upper left and upper right corners of a group indicate the number of
alarms and errors for that group, respectively.
See the
A
LARM
and E
RROR
screens.
Click on one of the groups to access the corresponding myGroup
screen.
Number of errors
1
5
4
5
4