The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the use of the
products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems. The document is subject to
change without notice.
Smart n' Slim MP-MT-EN
p
24/40
#Configurer M340-MT-FR-00#
Array
Group to which the target belongs.
Periodic mode
Weekly schedule to be applied each week.
Specific mode
Schedule for a specific day (e.g., a holiday) that will be applied only
once.
Starting hour/Ending
hour
Used to define the starting time and end time for the schedule.
Note 1
: Position the cursor at the end of the hours/minutes to delete and
modify them.
Note 2
: The reference is the time displayed on the monitoring panel
(item of the
Operating mode
To select the generic mode (from among those created in the
screen)
to be applied to the group .
Color
Used to select the color for the schedule in the weekly planner.
Weekly planner
Click on the day(s) of the week to which the planning applies
(in periodic
mode only ; in specific mode , the day is defined in section
).
Add
Button used to add the selection made in sections
to the weekly
planner .
Repeat steps to for each additional schedule to be applied to the
same target .
Save
Button used to save the schedules added with button
.
Schedule
Click on the visualization bar of the schedule to see the details or to
delete it.
Note:
click on the visualization bar again to quit the modification
mode.
Day
Choose, in a calendar, the day to which the planning applies
(in specific
mode only ; in periodic mode , the day is defined in section
).
Note1
: Click into the day field to show the calendar.
Note2
: put the cursor just after the hours/minutes to removing and
modifying it.
Note3
: the reference is the hour of the server (see point of the
8
4
2
3
11
10
10
10
10
9
1
8
4
7
5
4
8
11
3
2
7
12
6
1
5
8
4
3
2
1
1
