Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009 Скачать руководство пользователя страница 59

Страница: 59 / 255

Justify:

Center

Click OK.

Click the Insert Attribute tool.

Insert the attribute above the rectangle.

In the Symbol Builder Attribute Editor, notice the check mark next to
the TAG1 attribute. Continue placing the rest of the attributes.

In the Symbol Builder Attribute Editor select DESC1.

Click the Insert Attribute tool.

Insert the attribute below TAG1.

Insert the LOC and INST attributes as indicated.

Insert the FAMILY attribute near the center of the rectangle.

With FAMILY still highlighted in the Symbol Builder Attribute Editor,

select the Properties tool.

Enter:

Value:

Click OK.

This assigns the %F value to the FAMILY attribute inserted.

Adding Attribute Symbols | 53

Содержание 225A1-05A111-1001 - AutoCAD Electrical 2009
































































































































































































































































Результаты поиска

Содержание 225A1-05A111-1001 - AutoCAD Electrical 2009

Отзывы:

Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009, Начало работы, Страница: 59 / 255

Результаты поиска

Содержание 225A1-05A111-1001 - AutoCAD Electrical 2009

Отзывы: