manualshive.com logo in svg

Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009, Начало работы, Страница: 30 / 255

Поделиться
Скачать
Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009 Скачать руководство пользователя страница 30

In this exercise, you insert components on the wires previously defined in
AEGS04.dwg.

Insert a parent component

1

Zoom in on the upper left corner of the drawing.

2

Click Schematic tab

 ➤ 

Insert Components panel

 ➤ 

Insert Components

drop-down

 ➤ 

Icon Menu. 

3

In the Insert Component: JIC Schematic Symbols dialog box, click Relays/

Contacts. 

4

In the JIC: Relays and Contacts dialog box, click Relay Coil. 

5

Respond to the prompts as follows:

Specify insertion point:

Position the component on the wire at line reference 403 near the neutral wire
and click (1)

The coil symbol breaks the underlying ladder wire and reconnects if you
select directly on the wire or near to it. You did not select close enough
to the wire if the underlying wire did not break. To try again, click Cancel
on the Insert/Edit Component dialog box. Right-click or press 

ENTER

 to

repeat the command. Turning on Snap helps (0.125 is a good setting to
use).

This tool inserts components into alignment with underlying wires, it
does not align components side-to-side. If you want to insert components
in neat columns, you have three options: use AutoCAD Snap when
inserting components; use the Scoot command to move components and
connected wires in place; or use the Align Component tool.

6

In the Insert/Edit Component dialog box, verify that the Component
Tag is set to CR403.

24 | Chapter 4   Schematic Components

Содержание 225A1-05A111-1001 - AutoCAD Electrical 2009
































































































































































































































































Отзывы:

Нет отзывов