manualshive.com logo in svg

Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009, Начало работы, Страница: 230 / 255

Поделиться
Скачать
Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009 Скачать руководство пользователя страница 230

Changing Formats of BOMs

Each AutoCAD Electrical report is customizable, from which data fields are
reported and the order in which they appear to the justification of any column
and the column labels.

Remove the TAGS columns from the BOM

1

Erase the table, or UNDO, and rerun the BOM extract for AEGS03.DWG.

2

In the Report Generator dialog box, click Change Report Format.

In the Bill of Materials Data Fields to Report dialog box, Fields to report
section, the fields that format the BOM are displayed.

3

Select TAGS in the Fields to report list.

4

Click <<Remove.

The TAGS field is moved out of Fields to report and into Available fields.

NOTE

You can also select a field in the Available fields list to add it to the

report or rearrange columns using the Move Up and Move Down buttons.
Clicking Ok-Save As saves these settings to a file for later use.

5

Click OK.

224 | Chapter 11   Report Generation

Содержание 225A1-05A111-1001 - AutoCAD Electrical 2009
































































































































































































































































Отзывы:

Нет отзывов