background image

arriv

al a

t site

34

positioning the motorhome

note: Check and observe site regulations.

Keep to roadways unless otherwise directed. 
Adhere to speed limits. Note that these are 
generally 10mph.

Remember that the stopping distance  
on grass is considerably greater than  
on tarmac

Only a person in possession of a current driving 
licence may drive on the site.

Selecting a pitch 

Do not pitch in such a position that your 
motorhome will obstruct others coming in.

Try to choose an area which is dry, reasonably 
level and preferably with a hard base.

If you have no alternative but to pitch on a 
slope try to ensure that you are facing down 
the slope, for when you leave.

Levelling the motorhome 

Levelling must be carried out in both directions 
for the refrigerator and other equipment to 
function correctly. Stepped levelling boards or 
proprietary ramps are ideal for  
this purpose.

Fig. A

Awnings and Tents 

Awnings and tents should only be used when 
permission has been obtained. When on grass 
and staying for more than a few days the 
ground sheet and/or side flaps of awnings 
should be periodically raised in order to avoid 
damage to the ground.

Содержание 2012 Van Conversion Range


























































































































































Отзывы: