Auto-Sleepers Symbol Plus 2018, Руководство пользователя

Страница: 68 / 126

9-4
FITTED EQUIPMENT
Supervise the appliance during the entire
duration it is on
When the appliance is working, humidity,
heat and combustion products will be
released into the environment. It is therefore
fundamental for the premises to be
adequately ventilated. For example,
ventilation can take place via:
1. natural openings (e.g. windows, etc.)
2. extractor hoods/electric fans with
discharge duct and adequate power at
the use intensity of the appliance.
Periodically, check the openings are not
accidentally blocked and the extraction
system is working perfectly.
3. any other system or device compatible
with the type of application in question.
WARNING: Danger of scalding!
During operation and for a few minutes
after use, some parts of the appliance
reach very high temperatures! Do not
come into contact with these parts
without adequate safety guards.
SWITCHING OFF THE BURNERS
• When cooking is complete, switch off the
appliance by turning all the knobs “off”.
• Remove saucepans from the appliance
using adequate personal protective
equipment.
ANOMALOUS OPERATION
The following situations are considered
anomalous functioning and intervention of the
Support Service is required:
• The burner flame is yellow.
• Formation of soot on the kitchen utensils.
• The burners are not igniting properly.
• The burners won’t stay on.
• The burners go out when the kitchen
doors move.
• The gas valves are difficult to rotate.
If the appliance is not working, contact the
authorised local dealer.
USE OF THE OVEN AND GRILL
WARNING: Before switching on the grill
burner, open the door of the oven and
remove the grill deflector, whose use is
compulsory each time you want to use the
grill functionality.
IGNITING THE GRILL BURNER
1. Fully press the grill burner knob and
rotate it to the angle with grill writing (62º
angle).
2. At the same time, activate the electrical
ignition device by prolonged pressing on
the button positioned on the commands
front panel. The generator will emit a
rapid and repeated series of impulses.
3. After igniting, keep the knob fully pressed
for approx. 5 seconds, always pressing to
the minimum and then releasing it: this
release delay is used to heat the safety
thermocouple.
If on release of the knob, the burner does not
stay on, it means the thermocouple was not
sufficiently pre-heated. To solve the problem,
repeat operations 1, 2 and 3 keeping the
knob pressed for longer after igniting the
burner.
WARNING: Ignition must take place
without any food or saucepans in the
oven/grill compartment.
SAFETY WARNINGS:
Always disconnect the electrical power
supply (if present) and close the gas
supply taps before each cleaning
operation or if a long period of inactivity
is forecast. Ensure all the knobs are
always in the “off” position at the end of
use.
Danger of scalding! For a few minutes
after use, some parts of the appliance
maintain very high temperatures! Before
cleaning the appliance, wait for it to cool
completely: this makes operation easier
and safer, avoiding food residue catching
fire.
Clean ALL parts of the appliance only with
the methods and products indicated in
this manual. In particular, avoid using