Auto-Sleepers Symbol Plus 2018, Руководство пользователя

Страница: 3 / 126

1-1
Welcome.
Congratulations on your purchase of an Auto-
Sleeper motorhome. We are confident it will
give you many years of pleasure.
This handbook has been compiled to enable
you to obtain the maximum pleasure from
your vehicle. It contains the appliance
instructions along with advice on safety
matters.
Please read this Handbook thoroughly so that
you are conversant with all the motorhome
systems, operating instructions and
precautions.
Failure to observe these recommendations or
precautions may result in incorrect operation
of equipment and subsequent risk to
occupants.
Information leaflets and literature on safe
operation of appliances and equipment fitted
to your motorhome are included in the Auto-
Sleeper Customer Pack. Please read these
carefully prior to use.
Should you experience any difficulties contact
your dealer who will be pleased to offer
advise.
It is the policy of Peugeot and Auto-Sleeper to
continually improve their vehicles, so whilst
the details contained in this Handbook are
correct at the time of going to press, they
reserve the right to alter the specifications at
any time without notice.
Auto-Sleeper motorhomes offer a variety of
customer uses and whilst each vehicle
features the optimum storage, fluid, seating
and sleeping capabilities, it is the customer’s
responsibility to select the proper
combinations of loads without exceeding
weight capacities.
Your Auto-Sleeper motorhome conforms to
the European standard of EN 1646-1 for
habitation requirements relating to Health and
Safety.
IMPORTANT:
In the interests of safety, replacements parts
for appliances must conform to the
manufacturer’s specification and should be
fitted by them or an authorised agent.
Model
This Handbook covers the Symbol Plus
model, which is based on Peugeot Boxer L3
H2 long wheelbase high roof window van.
Gas System
The gas system is designed to operate on
LPG stored in a re-fillable tank fitted under
the vehicle. The regulator has a working
pressure of 30 mbar.
Conversion Type
Van conversion with end kitchen and
bathroom, combined with a front lounge with
seats that convert into a large double bed.
Climatic Conditions
This motorhome is designed for use in cold
climates, and is certified to grade 3 in
accordance with the European standard EN
1646-1: 2012. This means that it has been
tested and shown to provide a comfortable
internal environment even when the external
temperature is as low as -15ºC.
Handbook
Any queries should be addressed to your
Auto-Sleeper dealer.
Appliance Instructions
The appliance instructions included have
been extracted from those supplied from the
appliance manufacturers.
Automotive - Peugeot
For all automotive matters you should refer to
the Peugeot vehicle instructions manual. This
includes tyre pressures, referring to the type
of tyres fitted.
The Auto-Sleeper conversion does not affect
the tyre pressures in any way as it is built
within the design envelope of the base
vehicle.
The tyre pressures for your vehicle can be
found on a label located on the door pillar on
the left hand side of the body. Check the tyre
size fitted to your vehicle and read off the
appropriate information.
INTRODUCTION