In these instances, the RP panel X can be configured to automatically either release its
active station status for the engine, or deny the request altogether.
Either action takes place after the defined timeout
11.2.11 Lock
Leave administrative menu area, and lock the unit.
11.2.12 Start/Stop Buttons
Enable or disable the start/stop buttons of the RP.
11.2.13 Web Interface
Enable or disable the web interface. If the web interface is disabled, it can be enabled
temporarily in the non-password protected menu area.
11.2.14 Reset to Factory Defaults
Command to restore factory defaults. All configuration will be lost.
12 Troubleshooting
12.1 Password
The panel will issue an encrypted code if a wrong password is entered.
The factory default password is
1234
. If this password does not work, a new
password has been set.
This encrypted code can be sent to your distributor, who will be able to obtain the original
password.
Page 99 (99)
