3.1 Access Control
The DCU configuration is protected with a PIN code.
Select this option to change the PIN code. First, type in the old PIN, and then the new PIN
twice.
If the PIN is unknown or forgotten, then find the encrypted code and send this to
[email protected] to obtain the correct PIN.
3.1.1 Access Control Levels
If enabled, the DCU supports three levels of access control.
● Factory (highest priority)
● Dealer
● User
Each access control level can lock any configuration, making it impossible to change for
lower priority access.
When access control is enabled, make sure to close your browser after use (when
logging out) to prohibit any unauthorized access.
3.2 File
This section provides functions for management of configuration files and other file
operations, such as upgrading of firmware and uploading of custom wallpapers.
3.2.1 Load any File
To change the configuration of the DCU, load a new configuration file.
When a configuration file is selected, the panel will restart with the new
configuration file.
3.2.1.1 Factory Default
From here, a predefined factory configuration file can be opened.
3.2.1.2 User Uploaded
This lists the files previously uploaded to this DCU. Pick a file to select a new configuration
for the DCU.
Note! To get access to the configuration file, it needs to be uploaded to DCU first. See
“Upload to DCU” for more information.
3.2.2 Delete Configuration File
Delete any number of configuration files on the DCU. It is only the user uploaded
configuration files that can be deleted. The configuration files supplied from the factory will
always be available and can not be deleted.
3.2.3 Configuration Printout
This gives a quick overview of the current configuration.
Page 13 (99)
