400 Series Installation and Configuration
DCU 410 Engine Panel Installation
63
Home
–
DCU
–
Interface Design
This is the section where templates are populated with
the already configured signals from the I/O section.
A
page
on the DCU is built up with a
template
. A
template
has several
slot
positions. Each
slot
position can hold a
widget
type, which in turn can be assigned a
signal
.
Configuration
Chose if the DCU is to display green section on bars when
the signal is within parameter.
Option for displaying J1939 switchover from J1939#1 to
J1939#2.
Pages
This is where the configuration of the different pages is
done.
In the example below, three pages are created.
Insert a new Page
Choose whether the new page is to appear before or after
an existing page, then press the Insert Page button. The
pages will be renumbered.
