Autel OTOFIX D1 Pro Скачать руководство пользователя | Manualshive

Страница: 109 / 111

background image

102

20

Compliance Information

20.1 FCC Compliance

FCC ID:

WQ8-D1PRO2124

This device complies with Part 15 of the FCC rules and Industry

Canada’s license-

exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

WARNING

Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance
could void the

user’s authority to operate the equipment.

20.2 RF Warning Statement

The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.

«
...
107
108
109
110
111
»

Содержание OTOFIX D1 Pro
















































































































Отзывы:

Нет отзывов

Похожие инструкции для OTOFIX D1 Pro

Бренд: Keithley Страницы: 67

Бренд: Keithley Страницы: 23

Бренд: Keithley Страницы: 93

Бренд: Oki Страницы: 44

Бренд: Magnescale Страницы: 64

Бренд: Above All Страницы: 4

Бренд: Unitary products group Страницы: 28

Бренд: Quick Страницы: 24

Бренд: JDS Uniphase Страницы: 144

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 14

Бренд: JBSYSTEMS Light Страницы: 17

Бренд: Tanaka Страницы: 20

Бренд: Tandem Страницы: 80

Бренд: Tanco Страницы: 4

Бренд: K-SPORT Страницы: 5

Бренд: TBM Страницы: 22

Robus RVB007RGB10I65

Бренд: LED Group Страницы: 2

Бренд: Monosem Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды