Autel Robotics EVO II Pro Enterprise, Руководство пользователя

Страница: 43 / 64

43
Important

Wear protective gloves when installing or disassembling the propeller.

Install propeller
1. Confirm that the aircraft has been turned off.
2. Select the propeller matched for each motor.
3. Forcibly press down the propeller and rotate it along the locking direction till that it is installed
firmly.
Propeller With white mark Without white mark
Schematic
diagram
Installation
position
Installed to the mount with white mark
Installed to the mount without white
mark
Legend
Locking direction: rotate the propeller to tighten it as shown in the figure.
Unlocking direction: rotate the propeller to remove it as shown in the figure.

Disassemble propeller
1. Turn off the aircraft.
2. Forcibly press down the propeller and rotate it along the unlocking direction till that it is
removed.
Important

Check to confirm that each propeller has been installed firmly before flight.

Do not use the damaged propeller for flight.

It is forbidden to touch the rotating propeller or motor.

It is always necessary to take down the propeller before motor test.