AUTEC C26PRO SERIES, Руководство пользователя

Страница: 5 / 22

- 1 - LIPROMA3-00
- 1 Conventions -
1 CONVENTIONS
Any pieces of text written in bold should be read very carefully.
This symbol highlights extremely important indications and information
which, if not observed, can create seriously dangerous situations for people,
equipment or property.
This symbol highlights all important indications and information that deal
with operation.
2 CONFORMITY
The C26 PRO series PRO-M radio remote control is in conformity with FCC
Rules (Part 90 for the transmitting unit and Part 15 for the receiving unit).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party re-
sponsible for compliance could void the user’s authority to operate
the equipment.
In Technical Data (see chapter 15) there are the characteristics of safety functions
according with EN 954-1.
All machines must undergo a risk analysis; therefore it is necessary to evaluate, with-
in the limits of this analysis, if the machine can be radio remote controlled.
The machine producer and/or the person who decides upon radio remote control use
and installation is responsible for this analysis.
Autec, or its distributors, cannot be held responsible if the risk analysis is not
carried out correctly and if the radio remote control is installed on applica-
tions that are different from those permitted:
PERMITTED APPLICATIONS:
Hoisting and moving machines installed exclusively on vehicles that
use a battery as electrical power supply source (for example: hy-
draulic cranes, concrete pumps…)
FORBIDDEN APPLICATIONS
- machines installed in areas where equipment with explosion-
proof characteristics are being used
- AC supplied machines
- machines using a DC supply that does not come from a battery
- machines where risk analysis regarding verification of radio re-
mote control conformity to the application is not possible or has
given a negative or uncertain result.
To guarantee correct radio remote control operation, all current regulations regarding
safety at work and accident prevention should be respected. All applicable standards
and regulations valid in the user country regarding the use of both the machine and
the radio remote control MUST ALWAYS be respected.
Autec cannot be held responsible if the radio remote control is used in un-
lawful working conditions.
System must be installed by a licensed technician and in accordance with all
relevant local, state/provincial and federal regulations, including but not
limited to NEC, OSHA, CE etc.