AUTEC C26PRO SERIES, Руководство пользователя

Страница: 10 / 22

- 6 - LIPROMA3-00
- 7 Warnings regarding special maintenance -
3. verify and if necessary replace the strips or other fixing systems
4. make sure that the connecting cable has not deteriorated, particularly at the ca-
ble entry point.
7 WARNINGS REGARDING SPECIAL MAINTENANCE
While carrying out special maintenance on the radio remote control
and the machine, remove the battery from the transmitting unit and
disconnect the connecting plug from the receiving unit.
Any fault should be repaired by authorized Autec personnel (contact
Service), using original Autec spare parts only.
The following radio remote control data must be communicated in order to permit
faster and more reliable service:
-
serial number
- purchase date (given on the guarantee certificate)
- problem found
- address and telephone number of the place where the device is being used (with
the name of the person to contact)
- supplier.
It is better to have read and understood all parts of this manual, and made
sure that all the instructions it contains have been followed correctly before
contacting the Service Technicians.
8 DOCUMENTATION
The minimum documentation indicated below is always supplied
with the industrial radio remote control:
- instruction and warnings manual
- battery charger manual
- the radio remote control technical data sheet
Make sure that these documents are present. If they are not, please
request them from Autec or an authorized representative, specify-
ing the radio remote control serial number.
Instruction
and warnings
manual
This manual is an integral part of the radio remote control and its safety functions and
gives the main information necessary for installing, using and carrying out mainte-
nance on the radio remote control.
All installation, usage and maintenance operations must be carried out ex-
clusively by qualified technicians who are suitably trained in relevant norms
and laws.
As a minimum, the radio remote control owner, installer, user and the person in
charge of its maintenance must therefore read and understand each part of this man-
ual.
Follow the instructions and warnings given by the machine producer regard-
ing the machine controlled by the radio remote control.
If this manual is lost or damaged, ask for a copy from Autec or its authorized repre-
sentative. Please specify the serial number of the relative radio remote control.
The information contained in this manual is subject to modification without notice and
is not binding.
No parts of this manual may be reproduced by any means without the written per-
mission of Autec (including recording and photocopying).
Technical
data sheet The technical data sheet shows the wiring system between the receiving unit and the
machine. It should be filled out and checked by the installer, who has the responsi-
bility of a correct wiring.