Austroflamm 48x51x51 S3, Руководство по эксплуатации

Страница: 30 / 94

6 | Transport, handling and storage EN Operating manual Fireplace inserts S3
30
2
1
Fig. 5: Removing the transport locks
In addition with S3 fireplace inserts there are more transport
locks at the rear. These must also be removed before in-
stallation. For 48x51x51 S3, 48x72x51 S3 models, both
transport locks (1+2) should be removed. For all other S3
models, only the top transport lock (1) must be removed
2) Do NOT open sliding door.
3) Remove transport locks (1+2) depending on the
model.
4) Then remove transport locks.
ð Should the appliance be transported to another
location at a later point in time, then it is vital that
these transport locks are stored so that they can be
reinstalled again.
5) Check that the sliding door is working by opening the
door.
6.1.2 Carrying aids
1
Fig. 6: Transport lugs
All fireplace inserts have transport lugs (1) at the top which
can be used for the purpose of transporting the fireplace in-
sert with a crane.
6.2 Storage
The fireplace insert must be stored in a dry room/warehouse. Protect against dirt, heat and moisture.
The following illustrations are attached to the crate and must be observed:
• Fragile – always place upright – protect against moisture
and store dry.
• Remove and dispose of packing material in an environ-
mentally friendly manner.
• The crate can be disposed of in the separate collection
for packaging. Local disposal regulations must be ob-
served.