www.austin-hughes.com
UM-X-800-XMS-02-S-Q420V1
P.9
< 1.4 > Handle
X-800P / X-800M
Installation for
Single Point Lock
1. Mount the smartcard handle to the universal mounting position.
2. Place the handle mounting bracket with M4 x 9mm screw x 2 to secure the handle.
3. Attach
the
Cam
with square hole washer(s) to adjust and to
fi
t the cam locking position.
The extension spigot required or not for installation is subject to the rack door locking design.
Note : - If the cam cannot
fi
t the locking position after adjustment, customization for the cam is required.
- Cam customization service upon your request, please contact your sales representative.
4. Insert the M5 x 15mm screw x 1 with circle hole washer to secure the
Cam
to the handle.
5. Place the U bracket with M3 x 10mm screw x 2 to further secure the handle in place.
1
3
7
2
5
6
4
Handle mounting screw set for single point lock
Qty.
Single Point Lock
Handle mounting bracket
2
M4 x 9mm screw for
4
Square hole washer
6
Circle hole washer w/ M5 x 15mm screw
2
U bracket
2
M3 x 10mm screw for
4
Extensions spigot
2
2
3
4
5
6
7
1
1
1
2
7
3
5
6
4
Rack door
Cam
>>>>>
>>>>>
5
While insert the screws to secure
the handle with
electrical power
screwdriver
, please set the torque
NOT
exceed 8 kgf/cm
