STEP 6-(CONTINUED) GRILL BODY/CART ASSEMBLY- BONZA MODELS
•Lay Grill Body on its back side with control panel up. Place Grill Body between legs and Side Tables
with Hose and Regulator on Wheel Leg end.
Do not lay Grill Body on, or step on Hose
and Regulator.
•Align slotted holes on sides of Grill Body with holes through edges of legs. Hold Spacers
between Leg and Body (Needle Nose Pliers may help) and insert Body Bolts through Leg,
Spacers, and slotted holes in Grill Body. Secure using Wing Nuts, but only partially tighten. Repeat
assembly for remaining three Cart Legs.
•Using a second person,
turn full grill assembly
upright with wheels and
legs/casters on the ground.
Grill Body should slide down
and seat itself within the
slotted holes. If not, loosen
the Body Bolts and push
Body down at the corners.
Tighten all Body Bolts
and Wing Nuts and then
tighten all other Bolts.
•Adjust the Lock Lever up
or down on each Caster to
lock or unlock as desired.
15
Note: Bottom shelf not shown for clarity.