Aurora Archer IS720G, Инструкция по установке и эксплуатации, Страница: 33 / 51


TIMER symbol. If this symbol does not appear, the TIMER is not active. If only the
outline of the symbol appears, the TIMER is active. A solid black symbol indicated
that your are in the TIMER setting menu.

Symbols indicating the current day.

Internal clock. The clock functions as a countdown when the SLEEP function is
selected.

The temperature set by the user, that the appliance must achieve in AUTOMATIC
mode. This symbol does not appear in MANUAL mode.

Selectable unit of temperature measurement (Celsius—Fahrenheit).

Symbol identifying room temperature measured by the built in sensor.

The temperature currently measured by the remote controls built in sensor from the
room around the remote control.

Low battery symbol. When this symbol disappears completely without flashing, the
batteries must be replaced.

Keypad lock symbol (lock function prevents accidental operation of the buttons.
Definitions-
Automatic mode: The room temperature is automatically maintained. The flame level is ad-
justed up and down as required to maintain the desired temperature.
Manual mode: The flame level is set adjusted up and down by the user.
STANDBY: Only the pilot is ignited
CRONO: The fireplace operated according to the set times that have been
programmed.
Tcheck_STANDBY: Temperature check time in AUTO mode. STANDBY position.
Tckeck_MIN: Temperature check time in AUTO mode, MIN position (level 1).
Tcheck_LEVEL: Temperature check time in AUTO mode, burner position (level 2 up to 5).
Tset_MIN: Minimum SET temperature in AUTO mode.
Tser_MAX: Maximum SET temperature in AUTO mode.
REMOTE INSTRUCTIONS
32