AURATON 3013, Руководство пользователя

Страница: 17 / 20

17 16
The AURATON 3013 controller features a special FrostGuard
function which prevents freeze damage to your room. The function
is activated when the
controller is off .
When the controller is off and the temperature in the room drops to
2°C, the display will show the symbols
Fr ( ) and , and the
relay will activate. When the temperature rises to 2.2°C the display
will turn off again and the relay will disconnect the contacts
.
FrostGuard function
Checking the set temperature
By holding the button by minimum 2 seconds you can check
the currently programmed temperature.
The set temperature display segment will flash after pressing
this button. The function is active in all controller operation modes
.
OK
Notes
ź
You can switch on and off the controller any time by briefly
pressing the button.
ź
The first pressing of any function button always turns the display
backlight on, only the second pressing activates a given
function.
ź
During programming, failure to press any button for 10 seconds
is the same as pressing the button .