AURATON 3013, Руководство пользователя

Страница: 15 / 20

15 14
Setting the manual mode
If you want to suspend the normal or reduced
temperature for some time, use the manual mode for
maximum 8 days. To enter the manual mode
:
1. Press the button.
The display will show the hand
symbol ( ), and the tempera-
ture display segment will go into
the edit mode and will start
flashing.
. 2 . Turn the knob clockwise or
anticlockwise to set the desired
temperature.
Confirm your choice by pressing
the button .
3 . The hour field on the display will
go into the edit mode and will
start flashing.
Use the knob again to set the
number of hours during which
the manual mode will be on.
The days are added and subtracted
automatically when you exceed
24 hours. You can sent maximum
7 days and 24 hours.
Confirm your choice by pressing
the
button . OK
NOTE : The manual mode is not automatically repeated. When the
set time elapses, the controller reverts to previous
temperature programs: normal and temporary
temperature reduction, if the latter has been programmed
.
Switching off the manual mode earlier
The controller will run the programmed manual mode until
the set time elapses.
To switch off the manual mode earlier press the
button again. hand.