AuraMist AM12MF18-1, Руководство пользователя

Страница: 8 / 14

Rev. 2/13
AM12MF18-1
8
Fan Operation (ON-OFF, Speed control)
Press the button to Low, Med, High, or OFF to select fan speed (fig.1) .
Fan Operation (Oscillation Control)
To activate the oscillation function, turn the switch on. To deactivate (stop) the oscillation function,
turn the switch off. The oscillation angle is approximately
90 degrees (fig. 2) .
•
Misting Operation
IMPORTANT:
This product is designed to operate with clean water. The
misting fan and/or misting system may start up when the unit is initially plugged to
the power outlet.
IMPORTANT:
BEFORE STARTING:
l Check to ensure the water tank drain cap is secure and fully tightened (Fig. 1) .
l Please keep the mist fan 12 feet away from your furniture and other electrical appliances (fig. 2) .
l Clean and clear any dirt or dust from the fan to prevent water contamination.
l Check that all water and air tube connections are secure.
l Remove fill cap on power base assembly and fill with CLEAN WATER through the basket filter until
tank is filled to approximately 1” below the bottom of the basket filter.
l Add ¼ teaspoon of unscented chlorine bleach to the water tank (approximately 5 drops per gallon of
clean water).
l Replace fill cap and hand tighten.
Misting ON/OFF control
Mist ON
1. Turn the mist control valve counter-clockwise to fully open (fig. 3) .
2. Open and fill water tank (use clean water only), then lock the water cap. (important: Fully tighten tank
cap to ensure proper misting function) (fig. 4) .
3. Press the rocker switch to the ON position (fig 5) .
4. Once mist is visible, slowly close the mist control valve until desired mist is achieved, (refer to
ADJUSTING MIST DENSITY section, to get optimal mist performance) (fig. 6) .