3
Installation instruction
SHEV - Control Unit EMB 7300
W
ARNING
AND
SAFETY
SYMBOLS
IN
THESE
I
NSTRUCTIONS
:
The symbols used in the instructions shall be strictly observed and have the following meaning:
Failure to comply with the warning notes results
in irreversible injuries or death.
Failure to comply with the warning notes can
result in irreversible injuries or death.
Failure to comply with the warning notes can
result in minor or moderate (reversible) injuries.
Failure to comply with the warning notes can
lead to damage to property.
Caution / Warning
Danger due to electric current.
Caution / Warning
Risk of crushing and entrapment during device opera-
tion.
Attention / Warning
Risk of damage to / destruction of drives and / or win-
dows.
!
W
ARNING
!
D
ANGER
!
C
AUTION
N
OTE
!
Once the assembly and commissioning has been
completed, the installer of a machine „power-
operated window and door“ shall hand these ins-
tructions over to the end-user. The end-user shall
store these instructions in a safe place for further
reference and use, if required.
!
W
ARNING
Useful note
for an optimum installation.
Note regarding the system confi guration
using the free software of the Control Unit
manufacturer (USB connection).
A
BBREVIATIONS
USB
Scale units
°C
Degree Celsius
A
Amps
Ah
Amp-hours
kg
Kilogram
m
Metres
min
Minutes
mm
Millimeters
N
Newtons
s
Seconds
Pcs.
Pieces
V
Volts
PU
Packaging Units
Vpp
Residual ripple (Voltage Peak-Peak)
W
Watts
Ω / k Ω
Ohm / kilo-Ohm
Figures
AC
Alternating current (50Hz / 60Hz)
DC
Direct current
I
Electric current
L
Length
ME
Module space unit (1 ME = 23 mm)
NC
Contact „close“ (normally close)
NO
Contact „open“ (normally open)
P
Electric power
R
Electrical resistance
U
Electric voltage
Um
Change over switch
01
Index of abbreviations
These abbreviations are used consistently throughout these
assembly & operating instructions. Unless stated differently, all
dimensions indicated in this document are in mm.
General tolerances in accordance with DIN ISO 2768-m.
aP
Surface mounting
WxHxD
Width x Height x Depth
CAN
CAN-BUS
CM
Control Module
COM
Common connection
DIN
German Institute for Standardisation
DM
Drive Module
EN
European Standard
IN
Input
LON
Local Operating Network
OUT
Output
PG
Price group
PM
Power Modul
PS
Power supply
RAL
Central European Colour Standard
RM6
Relay Module
RWA
SHEV – smoke and heat exhaust ventilation
SM
Sensor Module
uP
Flash mounting
WM
Weather Module
WRG
Wind direction sensor
P
RELIMINARY
REMARK
