11.
Opening the switch compartment
To be able to carry out the following settings (up to and including clause 18.),
the switch compartment must be opened and, if installed, the indicator disc
must be removed.
These settings are only valid for “clockwise closing”, i.e. driven shaft turns
clockwise to close the valve.
Work on the electrical system or equipment must only be
carried out by a skilled electrician himself or by specially
instructed personnel under the control and supervision of
such an electrician and in accordance with the applicable
electrical engineering rules.
11.1 Removing the cover from the switch compartment
.
Remove 4 bolts and take off the cover at the switch compartment
(figure 23 or figure 24).
11.2 Pulling off the indicator disc (option)
.
If installed, pull off indicator disc (figure 25) Open end wrench
(approx. 14 mm) may be used as lever.
21
Multi-turn actuators SA 07.1 – SA 30.1/SAR 07.1 – SAR 30.1
Operation instructions
with actuator controls AUMA MATIC AM 01.1/AM 02.1
Figure 23: Cover with
indicator glass
Figure 24: Cover without
indicator glass
DSR
WDR
Figure 25: Pulling off the indicator disc
Indicator disc
