84
GB
Network profiles
Each time that you connect your radio to a WiFi network, the radio will store the details of that
connection (SSID, security key, DHCP/IP address settings) as a profile. Up to four such profiles
are stored in the radio so that if the unit is used in multiple locations there is no need to enter the
network settings when returning to a location previously visited.
The radio stores the four most recent profiles in memory identified by their SSID. Normally the
radio will attempt to connect to one of the stored profiles and only if it is unable to do so will you
need to use the Network Wizard.
In the event that you visit a location only once you may wish to delete the profile for the network
in that location to avoid losing other profiles.
1. Access the menu for the current mode by pressing and holding the
Info/
Menu
button. Rotate
the
Tuning Control Rotary
until 'System settings' is highlighted on the display. Press the
Tuning Control Rotary
to enter the settings menu.
2. Rotate the
Tuning Control Rotary
until 'Network' is highlighted on the display. Press the
Tuning Control Rotary
to enter the Network settings menu.
3. Rotate the
Tuning Control Rotary
until 'Network profile' is highlighted on the display. Press
the
Tuning Control Rotary
to see the stored profiles. The profile which is currently in use (if
any) is marked with an asterisk.
4. To remove a profile from memory, rotate the
Tuning Control Rotary
to highlight the profile to
be deleted and then press the
Tuning Control Rotary
to confirm the setting.
5. The radio will offer a 'YES' or 'NO' selection. Rotate the Tuning Control Rotary to select 'YES'
and then press the
Tuning Control Rotary
to confirm the setting. The selected profile will be
deleted.
Note:
It is not possible to delete a profile which is currently in use.
Confirm delete
NO
YES
Confirm delete
Main menu
Bluetooth
AUX-IN
Sleep timer
Alarms
System settings
>
Nework settings
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network profile
>
>
Nework Profile
Jones family
Paul’s network
Test router
*
System settings
Network
Time/Date
Backlight
lnactive Standby
Language
>
>
>
>