Page 3
UNLOCKING THE SYSTEM
As you approach the vehicle, press and release the left button on the keychain transmitter,
the doors will unlock, the parking lights will flash two times, the vehicle horn (or optional
siren) will chirp twice, and the dash mounted LED will turn off. If you have the optional
entry illumination circuit installed, the interior light will turn on for 30 seconds or until the
ignition key is switched on.
Note:
If the passive arming mode was selected at time of installation, the dash mounted
LED will start flashing rapidly indicating that the system is rearming. Opening any door will
suspend the automatic arming.
SILENT UNLOCKING
1. As you approach the vehicle, press and hold the left button of your key chain transmit-
ter for two seconds, or until the system responds.
The doors will unlock, the parking lights will flash twice, and the dash mounted LED will
turn off, confirming that the system is disarmed. The vehicle horn (or optional siren) will
not chirp. If you have the optional entry illumination circuit installed, the interior light will
turn on for 30 seconds or until the ignition key is switched on.
Note:
If the passive arming mode was selected at time of installation, the dash mounted
LED will start flashing rapidly indicating that the system is rearming. Opening any door will
suspend the automatic arming.
OPTIONAL ACCESS GUARD ( Two Step Unlock )
If the optional 2-step unlock feature was installed, then only the driver's door will unlock
after the first press of button one. If you want to unlock all doors, you can simply press the
left button of the keychain transmitter once more within 3 seconds of the first press.
NOTE:
If you wait longer than 3 seconds before pressing the left button of the keychain
transmitter again, then the command will be treated as an lock command and the
system will lock.
Two Step unlocking is an optional feature that
must be wired
upon installation.
VALET / PROGRAM / MANUAL OVERRIDE SWITCH
The valet switch allows you to temporarily prevent the PRO 9845 from arming, eliminating
the need to hand your keychain transmitter to parking attendants or garage mechanics.
When the system is in the valet mode, it will not passively arm or activate the starter
interrupt circuit. However, all keyless entry features, as well as the remote panic feature
will remain operational. To enter the valet mode:
1. Start with the valet switch in the "off" position
2. Turn the ignition switch to the "on" position.
3. Flip the valet switch to the "on" position.
The dash mounted LED will turn on solid (not flashing) indicating that the valet mode has
successfully been entered.
To return to the normal mode of operation, move the valet switch to the "off" position at any
time the ignition switch is in the on position.
