Page 5
NOTE:
You may access the Channel 2 command regardless of whether the system is
"locked" or "unlocked", but not when the ignition switch is in the on position. This is to prevent
the output from accidentally opening the vehicle's trunk when the vehicle is in motion.
ADDITIONAL REMOTE FUNCTION CHANNEL 3
The system has an additional output, (Channel 3) ,that can be connected to a number of
different optional accessories. Some of the more common uses for this channel are:
Remote Engine Start
Remote Window Close
Remote Garage Door Interface
To operate the accessory associated with Channel 3, simultaneously press both buttons
of your keychain transmitter.
NOTE:
The channel 3 output will remain active for as long as the transmitter buttons are
held. Certain accessories may take advantage of the extended output capability
of this channel. To discontinue the output, simply release the transmitter buttons.
IGNITION DOOR LOCKING/UNLOCKING
The PRO 9845 system is capable of being programmed for the added safety and security
of ignition controlled door locking and unlocking. These features are separate, so the
PRO 9845 may be programmed for one, or both, or neither.
When the ignition door locking feature is programmed, the PRO 9845 system will cause
all door locks to lock whenever the ignition switch is turned from the off to on position,
(providing that all doors are closed at that time). All doors will lock approximately 3 seconds
after the vehicle's ignition switch is turned on. This is a nice feature for maintaining the
personal safety of the occupants of the vehicle, in an effortless and automatic manner.
When the ignition door unlocking feature is programmed, the PRO 9845 system will cause
all door locks to unlock whenever the ignition switch is turned from the on to off position.
All doors will unlock immediately after the vehicle's ignition switch is turned off. If 2 Step
unlock was installed, only the driver's door will unlock.
As stated these features are programmed separately, so you may chose to use one, both,
or neither. Please consult with your dealer to consider your options.
TWO STEP UNLOCK (ACCESS GUARD)
By pressing the left button of the keychain transmitter as you would normally, (Please see
the section titled "Unlocking The System", earlier in this manual), the system will disarm, and
only the driver's door will unlock. If however, you should then decide instead that you want
all doors to unlock, you can simply press the left button of the keychain transmitter once more,
within 3 seconds
, and all doors will unlock.
