background image

Copyright Information

All rights reserved by SHENZHEN SHANGJIA TECH. CO., LTD. No part of this 

publication may be reproduced, stored in a retrieval system, or transmitted in any 

form or by any means, electronic, mechanical, photocopying, recording or 

otherwise, without the prior written permission of MRCARTOOL. The information 

contained herein is designed only for the use of this unit. MRCARTOOL is not 

responsible for any use of this information as applied to other units.
Neither MRCARTOOL nor its affiliates shall be liable to the purchaser of this unit or 
third parties for damages, losses, costs, or expenses incurred by purchaser or third 

parties as a result of: accident, misuse, or abuse of this unit, or unauthorized 

modifications, repairs, or alterations to this unit, or failure to strictly comply with 

MRCARTOOL operating and maintenance instructions.
MRCARTOOL shall not be liable for any damages or problems arising from the 
use of any options or any consumable products other than those designated as 

Original MRCARTOOL Products or MRCARTOOL Approved Products by 

MRCARTOOL.
Other product names used herein are for identification purposes only and may be 

trademarks of their respective owners. MRCARTOOL disclaims any and all rights 

in those marks.
This unit is made for the purpose of persons who have special techniques and 

certifications.
Manual are either trademarks, registered trademarks, service marks, domain 

names, logos, company names of or are otherwise the property of MRCARTOOL 

or its affiliates. In countries where any of the MRCARTOOL trademarks, service 

marks, domain names, logos and company names are not registered, 

MRCARTOOL claims other rights associated with unregistered trademarks, 

service marks, domain names, logos, and company names. Other products or 

company names referred to in this manual may be trademarks of their respective 

owners. You may not use any trademark, service mark, domain name, logo, or 

company name of MRCARTOOL or any third party without permission from the 

owner of the applicable trademark, service mark, domain name, logo, or company 

name. You may contact MRCARTOOL by visiting MRCARTOOL at 

https://www.mrcartool.net, or writing to [email protected], to request written 

permission to use Materials on this manual for purposes or for all other questions 

relating to this manual.

Содержание T105







Отзывы: