background image

Safety Instructions:
1.Please read this manual carefully before using the equipment!
2.Be careful when touching equipment or hot parts of the engine.
3.If the power cable is broken, do not turn on the equipment. If the equipment is 

dropped or damaged, please do not use it again until an inspection by 

professionals.
4.Do not connect the power plug when the machine is not in use. The power plug 

should be unplugged by hand, not by pulling to remove it.
5.Before storing the equipment, the equipment should be completely cooled and 

the cables should be wound up.
6.To prevent electric shock, do not operate the equipment in a wet area or in the 

rain.
7.Please follow the instructions in the manual to operate the equipment. Use 

accessories recommended by the manufacturer.
8.When removing the fuel cap, cover the connector with a towel to avoid injury.
9.The use time of the equipment should not be too long, 3~5 minutes, so as to 

avoid excessive internal temperature and damage to the components.
10.The test oil volume of the equipment should not exceed 20ml, so as not to 

cause the equipment to not output smoke.
11.The test oils are liquid paraffin and baby oil, not other mineral oils.
12.Change the test oil regularly. Before adding new oil, pour out the used oil 

remaining in the detector.
13.Non-technical personnel should not alter, disassemble or repair the product to 

avoid unnecessary damage.

Precautions

Содержание T105







Отзывы: