-2-
6
LOUDNESS CONTOUR (LOUD)
To adjust the Loudness Contour, first select the Loudness mode
by pressing the Select (SEL)
3
so that "LOUD" indication
appears on the display panel. Within 5 seconds press either (+)
for "On" or (-) for "Off". When listening to music at low volume
levels, this feature will boost the bass and treble ranges to
compensate for the characteristics of human hearing.
7
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button
3
so that the “bAL” indication
appears on the display panel. Within 5 seconds of choosing the
Balance mode, press the - side of the Level Control
2
to adjust
the stereo balance to the left channel speakers or the + side
to adjust it to the right channel speakers. When the volume level
between the right and left channels is equal, “0-0” will be shown
on the display panel. Adjusting the balance toward the right will
increase the number on the right side of the display to a maximum
of “0-9” (full right). Adjusting the balance toward the left will
increase the number on the left side of the display to a maximum
of “9-0” (full left). The display will automatically return to the
normal indication 5 seconds after the last balance adjustment or
when another function is activated.
8
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button
3
so that the “FAd” indication
NOTE: Release the button as soon as the display changes from
frequency to time (approximately 2 seconds). Holding the
button in for too long will put the unit into time setting mode
(flashing time display). See section on “Setting the Clock”.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the Select button
3
so that the level number above the “BASS”
indication is flashing. Within 5 seconds of choosing the Bass
mode, press the + or - side of the Level control
2
to adjust the
bass response as desired. The bass level will be shown on the
display panel from a minimum of -7 to a maximum of 7 (0 is flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
the Select button
3
so that the level number above the “TRE”
indication is flashing. Within 5 seconds of choosing the Treble
mode, press the + or - side of the Level control
2
to adjust the
treble response as desired. The treble level will be shown on the
display panel from a minimum of -7 to a maximum of 7 (0 is flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
