bn
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the
following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/Down
or Automatic Seek Tuning Controls
9
.
3. Press the pre-set button to be set and continue to hold it in.
After approximately 2 seconds, the display will flash, the
volume will be momentarily muted and the pre-set button
number (P1, P2, etc.) will momentarily appear on the display
panel indicating that the station is now set into that pre-set
memory position. The station can now be recalled at any
time by pressing that button.
4. Repeat the above procedure for the remaining 5 pre-sets on
that band and for the other 2 bands on the unit.
bo
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency,
time, and activated functions.
NOTE: It is a characteristic of LCD panels that, if subjected to cold
temperatures for an extended period of time, they may
take longer to illuminate than under normal conditions. In
addition, the visibility of the numbers on the LCD may
slightly decrease. The LCD read-out will return to normal
when the temperature increases to a normal range.
-4-
bp
CASSETTE DOOR
Hold the cassette with the exposed tape edge to the right and
insert it into the cassette door. Depress fully until the cassette is
engaged and begins playing as shown by the tape direction
indication on the display panel. When the cassette reaches the
end on the side of the tape being played, the unit will automatically
change direction of play as shown by the direction arrow and
play the other side of the cassette.
NOTE: Observe cassette operation Cautions in the Care and
Maintenance section of this manual.
bq
FAST-FORWARD BUTTON (FF)
Pushing the Fast-Forward button will cause the tape to move rapidly
in the forward direction of play (tape direction arrow on display
panel will flash). To stop Fast-Forward movement, lightly push
the Rewind Button
bq
until the Fast-Forward button disengages.
br
REWIND BUTTON (REW)
Pushing the Rewind button will cause the tape to move rapidly in
the reverse direction of play (opposite tape direction arrow on
display panel will flash). To stop Rewind movement, lightly
push the Fast-Forward button
bq
until the Rewind button disengages.
