-6-
SETTING THE CLOCK
1. Turn the radio on so that the radio frequency or clock time is shown on the display panel.
2. Press and hold the Select button
3
approximately 4 seconds until the time display begins flashing.
3. While the time display is still flashing, press the Volume button ( + ) to adjust the hours and the Volume button ( – ) to adjust the
minutes to the correct time.
4. When the correct time is shown on the display panel, press the Select button
3
again to return to normal display.
DETACHING THE FRONT PANEL
ATTACHING THE FRONT PANEL
Release Button
Engage right
side first
NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is right-side-up when attaching it
to the chassis as it cannot be attached when up-side down.
2. Do not press very hard on the front panel when attaching it
to the chassis. No more than light to moderate pressure
should be needed.
3. When attaching the front panel, make sure the right side is
correctly engaged before pressing the left side to lock it into
position.
4. When taking the front panel with you, please use the supplied
carrying case to protect the panel from dirt and damage.
Make sure there is no dust or dirt on the electrical terminals
on the back of the panel as this could cause intermittent
operation or other malfunctions.
