-7-
Backward Track Select button (TRK–), the next lower track number will
be selected.
cq
CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the disc can be made by
the Cue and Review functions. Press and hold the TRK+ button to
advance rapidly in the forward direction or the TRK– button to advance
rapidly in the reverse direction. During either function, the elapsed
time within each track will automatically be shown on the display panel.
When the button is released, the CD resumes normal play.
cr
PAUSE/PLAY SELECTOR ( II )
During disc play, press this button to temporarily stop play of the disc
("PAUS" will appear on the display panel and flash). Press the button
again to resume play of the disc from the point at which it was stopped.
Pause mode will also be canceled by activating the Disc Select
cn
and
co
, Track Select
cp
, or Cue/Review
cq
functions.
cs
TRACK/DISC REPEAT (RPT)
When the Repeat button is pressed, play of the selected track will be
continually repeated (“RPT” will appear on the display panel). The
Track Repeat mode will be canceled by pressing the Repeat button
again (“RPT” will disappear from the display panel) or by activating the
Shuffle
ct
or Scan
cu
functions
When the Repeat button is pressed and held longer than 2 seconds,
play of the selected disc will be continually repeated (“RPT” and
D
will
appear on the display panel). The Disc Repeat mode will be canceled by
pressing the Repeat button again (“RPT” and
D
will disappear from
the display panel) or by activating the Shuffle
ct
or Scan
cu
functions.
CD CHANGER CONTROLS
Built into this unit are controls to operate an optional CD changer. Please
check with your Prestige car stereo specialist for recommendations
of the models that will work with this unit.
Adjustment of the audio functions (volume, tone, balance, and fader)
for the CD changer operate in the same manner as they do for radio
and cassette play. The following controls will operate the CD changer
when it is installed and connected to this unit. Refer to the owner’s
manual included with the CD changer for instructions on the instal-
lation and correct loading and use of the CD magazine.
cm
MODE SELECTOR
With the CD changer connected to the unit, this button is used to select
CD changer operation. To choose CD mode, press the button until the
indication “DISK TRACK" appears on the display panel. The display
will then change to indicate the disc number and track number. Press
the Mode button again to change back to radio or tape operation.
cn
&
co
DISC SELECT (D+) (D–)
These buttons are used to select the desired disc for play. To advance
to a higher number disc, press the “D+” button
co
. To return to a lower
number disc, press the “D–” button
cn
. The number of the selected disc
in play will be shown on the display panel.
cp
TRACK SELECT
These buttons are used to quickly select the beginning of a par-
ticular track. With each momentary tap of the Forward Track Select
button (TRK+), the next higher track number will be selected as shown
on the display panel. Similarly, with each momentary tap of the
