![background image](http://html1.mh-extra.com/html/audiovox/jensen-vm8022/jensen-vm8022_installation-and-operation-manual_3013923006.webp)
VM8022
2
turn the unit on to confirm operation (vehicle ignition must be on). If the
unit does not operate, re-check all wiring until the problem is corrected.
3.
Secure the rear of the unit to the car body using the mounting bolt and
rubber cushion.
4.
Test the radio using the “Operation” instructions that follow.
Kit Installation
If your vehicle requires the use of an installation kit to mount this radio,
follow the instructions included with the installation kit to attach the radio to
the mounting plate supplied with the kit.
1.
Wire and test the radio as outlined in the Universal Installation instruc-
tions.
2.
Install the radio/mounting plate assembly to the sub-dashboard
according to the instructions in the installation kit.
3.
Replace the dashboard trim panel.
ISO Installation
This unit has threaded holes in the chassis
side panels which may be used with the
original factory mounting brackets of some
vehicles to mount the radio to the
dashboard. Please consult with your local
car stereo shop for assistance on this type
of installation.
1.
Remove the existing factory radio
from the dashboard or center console
mounting. Save all hardware and brackets as they may be used to
mount the new radio.
2.
Carefully unsnap the plastic frame from the front of the new radio
chassis. Remove and discard the frame.
3.
Remove the factory mounting brackets and hardware from the existing
radio and attach them to the new radio. Do not exceed M5 x 9mm
maximum screw size. Longer screws may damage components inside
the chassis.
4.
Wire the new radio as outlined in the Universal Installation instructions.
5.
Mount the new radio assembly to the dashboard or center console
using the reverse procedure of step 1.
Fuses
When replacing a fuse, make sure the new fuse is the correct type and
amperage. Using an incorrect fuse could damage the radio.
Reconnect Battery
When wiring is complete, reconnect the battery negative terminal.
Technical Assistance
If you require assistance, contact Technical Support at 1-800-323-4815
from 8:30am to 7:00pm EST Monday through Friday and from 9:00am to
5:00pm EST on Saturday.
RUBBER CUSHION
MOUNTING BOLT
RADIO
TRIM RING
Содержание Jensen VM8022
Страница 1: ...160 Watts Peak Watts en Cr te Vatios el M ximo 40W x 4 VM8022 Installation and Operation Manual...
Страница 2: ......
Страница 4: ...ii VM8022...
Страница 22: ...VM8022 18...